EAO-2400-15W EOL

2.4GHz Omni Antenna

DESCRIPTION

EAO-2400-15W is a high performance omni-directional antenna designed for the 2.4 GHz band, and is well suited for multipoint applications where high gain and wide coverage is desired. Its diameter is Φ30mm.

Extend the range of either your indoor or outdoor access point with a simple, and cost-effective outdoor omni antenna. This 15dbi omni antenna is best used for applications where you need to run an extension cable from your desktop/access point to the antenna. Most recommeded to be used with EOC2611P and ECB3500

MOUNTING DIAGRAM
INSTALLATION:

1. Mount the antenna on the mounting brackets according to the Mounting diagram
- The Antenna is vertical polarized
- Make sure the antenna palarization are vertical to the ground
2. Mount the antenna on the mast supplied by customer according to the Mounting diagram
3. Test the antenna with equipment to make sure the antenna receive the best signal
4. Then lock all the screws and seal the connector between antenna and cable.

  

 


ANTENNA SPECIFICATIONS

ANTENNA
GAIN 15dBi
FREQUENCY BAND RANGE
2.4 - 2.483GHz
VSWR ≤ 1.5
HORIZONTAL BANDWIDTH  360
VERTICAL BANDWIDTH 5

ANTENNA RADIATION PATTERNS

 

 

                               E-Plan

 

 

H-Plan


 


DOWNLOADS
 Datasheet

ORDERING INFORMATION

Product Name:
2.4GHz Omni Antenna
Product Code:
EAO-2400-15W
Made in Taiwan



Copyright © ENDY AUSTRALIA, 2017. All Rights Reserved. Use of the information contained on this page is governed by Australian law and is subject to the disclaimers which can be read on the Term of Use. View the ENDY AUSTRALIA Privacy Policy.