![](http://endy.com.au/endy/_img/_item/200911261136251965803599_small.jpg)
P-2602HW-D1A
|
All-in-one ADSL VoIP IAD
ALL-IN-ONE ADSL VoIP IAD
ZyXEL P-2602HW Gateway Series is an integrated Internet access device supporting high-speed ADSL, ADSL2 and ADSL2+ standard over existing copper lines. Combining convenient Wireless AP (optional), Ethernet switch, Firewall and VoIP gateway features, it is indispensable for homes and small offices with limited space and technical expertise. FLEXIBLE PHONE FEATURES
With two built-in phone ports and flexible calling features, ZyXEL P-2602HW not only empowers ITSP to enjoy better profitability from flexible phone number assignment, but also offers unprecedented flexibility for users to talk unlimitedly through high-speed broadband connection. ADVANCED SECURITY FEATURES
Based on Stateful Packet Inspection and Denial of Service (DoS) technologies, the P-2602HW provides state-of-the-art firewall performance and robust protection against hackers, network intruders and other malign threats. Furthermore, the standard-based IPSec VPN ensures secured data transmission for site-to-site and remote access deployment. Since data sent by P-2602HW over the Internet can be encrypted, users is free to use the ADSL2/2+ line to replace private leased lines or frame relay networks, allowing global interconnectivity at minimal expense.
|
Voice Codec
Voice Feature
- SIP (RFC 3261) version 2
- SDP (RFC 2327)
- RTP/RTCP (RFC1889, 1890)
- Echo Cancellation: G.168
- VAD (Voice Activity Detection)
- Silence Suppression
- CNG (Comfort Noise Generation)
- Dynamic Jitter Buffer (Adaptive)
- DTMF Detection and Generation
- DTMF: In-Band and Out-of-Band (RFC2833), (SIP INFO)
- Fax Tone Detection and Pass-through
- Modem Tone Detection and Pass-through
- T.38 FAX Relay*
- CLID
- Call Waiting*
- Call Forward*
- Three way conference*
- MWI*
- Flash Hook Timer*
- Multiple SIP Accounts Freely assignable to Each Phone Port
QoS
- Diffserv
- Voice priority always guaranteed.
- Media Bandwidth Management (MBM)*
- E to E QoS mechanism (depends on service providers' network)
ADSL Compliant
- Support Multi Mode Standard (ANSI T1.413 Issue 2, G.dmt, G.lite)
- ADSL2 G.dmt.bis (G.992.3)*
- ADSL2 G.lite.bis (G.992.4)*
- ADSL2+ (G.992.5)*
- Reach Extended ADSL (RE ADSL)*
ATM Support
- 8 PVCs Support
- RFC 1483/2684 Multiple Protocol over AAL5
- RFC 2364 PPP over AAL5
- RFC 2516 PPP over Ethernet
- VC and LLC Multiplexing
- Traffic Shaping UBR, CBR, VBR
- ATM Forum UNI 3.1/ 4.0 PVC
- I.610 OAM F4/F5 loop-back, AIS, and RDI OAM cells
- TR-048
Routing Support
- IEEE 802.1d Transparent Bridging
- IP Routing: TCP, UDP, ICMP, ARP
- RIP1v1 and RIPv2
- IP Multicast IGMP v1/v2
IP Management
- SUA/Multi-NAT Internet Sharing
- Multimedia Support
- DHCP Server/Relay/Client
- DNS Proxy
- Dynamic DNS
- UPnP Support
Wireless LAN
- IEEE 802.11g/11b Compliance
- Data Rates up to 54Mbps, Auto Fallback
- 64/128/256bits WEP Encryption
- MAC Address Filtering
- IEEE 802.1x Port-based Authentication
- One non-detachable Antenna
Firewall Security
- Stateful Packet Inspection
- Prevent DoS Attack
- Access Control of Service
- Content Filtering
- IP & Generic Packet Filtering
- Real-time Attack Alert and Logs
Virtual Private Network
- 20 IPSec VPN Tunnels
- IKE and Manual Key Management
- AH and ESP Protocol
- DES ,3DES and AES Encryption
- SHA-1 and MD5 Authentication
- Tunnel and Transport Mode Encapsulation
Network Management
- Web based Configuration
- Command-line Interpreter (CLI)
- Telnet Remote Management
- SNMP Support
- FTP/TFTP firmware upgrade and configuration backup/restore
- Built-in diagnostic tool
PSTN Lifeline Support (Optional)
- Send Emergency Call to PSTN
- Make a PSTN Call by Dialing Pre-fix Number
- PSTN Relay when Device Power Down
- PSTN Relay when VoIP Service is Not Available
- Receive Incoming PSTN Phone Call
Hardware Specifications
- ADSL:
- RJ-11 for P2602H/HW over POTS
- RJ-45 for P2602H/HW over ISDN/UR2
- RJ-45 for P-2602HWL over POTS/ISDN/UR2
- LAN: Four Ports 10M/100M Auto MDI/MDIX Ethernet Switch
- Phone: Two RJ-11 Ports for Analog Service Connection
- Reset Button
- Status LEDs Indicator
- Power: 18V DC 1A Switching Power Supply
Physical Specifications
- Dimensions :248(W) x 168(D) x 37(H) mm
- Weight: 642g
Environmental Specifications
- Temperature: 0°C ~ 40°C
- Humidity: 20% ~ 85 % ( non-condensing)
* Firmware upgradeable for future enhancement
|
|
|