NV-202P

Long Reach Ethernet Extender with PoE

The NV-202P is low cost LAN extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric using only a single copper wire pair. Designed specifically for a LAN to LAN extension and supporting both symmetrical and asymmetrical transmission at up to 100/100Mbps within 300 meters and 5/1Mbps at 3000 meters, this is a perfect solution to extend LAN with PoE for IP Surveillance or PoE powered devices at any location outside of the 100 meters reach.

Features

• Provides 2 x 10/100 Mbps RJ-45 Ethernet ports with power injector
• Supports RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 100Mbps symmetric over Line ports
• Support long reach mode up to 3 km with 24 gauge phone wire
• DIP switch with CO and CPE mode selectable
• Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
• Supports long packet size up to 1536 bytes
• Supports Surge protection for line port
• Auto-detect of PoE IEEE 802.3af/at (up to 30W) equipment providing protection from
  incorrect installation
• Supports mid-span PoE mode
• Supports wall mounting and DIN-Rail mount installation (Optional)

 


DOWNLOADS
 

ORDERING INFORMATION

Product Name:
Long Reach Ethernet Extender with PoE
Product Code:
NV-202P
Made in Taiwan



Copyright © ENDY AUSTRALIA, 2017. All Rights Reserved. Use of the information contained on this page is governed by Australian law and is subject to the disclaimers which can be read on the Term of Use. View the ENDY AUSTRALIA Privacy Policy.