Industrial Managed 12-Port L2 Gigabit Ethernet Switches with 4 dual-speed SFP Slots

Product Highlights:

• Web, telnet, SNMP managed
• IPv6 support
• 4 SFP dual speed support
• Redundant power input
• RSTP, STP, MSTP support
• Multi redundant ring support
• IGMP & MLD snooping

Key Features:

• Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
• Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.
• All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
• Full wire speed forwarding for all 12 Gigabit switched ports
• Support 802.3x flow control for full-duplex and backpressure for half-duplex
• Support SFP with Digital Diagnostic Monitoring (DDM)
• Powered via typical industrial power voltage DC 12V-60V
• Provide Optical Power Alarm (OPA) function
• Provide Automatic Laser Shutdown (ALS) function
• Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP

Management Features:

• Management:

> HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON

> DHCP/DHCPv6 client, DNS client. NTPv4

> IPv6 support, System Syslog, Configuration down/upload, Software upload

• Security:

> NAS, 802.1X, MAC-based/Web/CLI authentication

> IP MAC binding, TACACS+, IP source guard

• Layer 2:

> QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation

> Storm control for UC/MC/BC packets

> LACP port link aggregation

> Static MAC configuration

> IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping

> Multiple Spanning Tree – MSTP. RSTP, STP

• KTI’s Auto Multi-Ring (KAMR) Technology:

> Fast failover response time, Auto ring recovery when failure is repaired

> Support up to six redundant rings, Works with RSTP network

> Support ring member status monitoring for up to 100 units