VDSL2 Ethernet Bridge Modem (200Mbps) Ethernet Up to 3Km
100Mbps@0.3Km, 5/1 Mbps@3km, Support DIN rail mount
The Netsys VDSL2 Ethernet Bridge Modem (NV-202) features auto-configuring speeds up to 100Mbps symmetrical (up to 1,000 feet, with speeds dropping off asymmetrically from there), automatically optimized based on the quality of the line and the distance with a maximum distance of 10,000' (3 km) over existing twisted-pair phone line or network cable, and can be configured as a CPE or CO modem using the DIP switches on the unit.
For a kit which includes two (2) NV-202 modems pre-configured for plug-and-play operation, see our HyperXtender ER Ethernet Extender Kit (NV-202EKIT).
The VDSL2 Ethernet Bridge Modem comes ready to plug and play out of the box for distances up to 10,000 feet (3 km) at an auto-configured bandwidth of 5.04Mbps downstream and 1.48Mbps upstream, or line speeds up to 100Mbps symmetrical at distances up to 1,000 feet (0.3 km), which is more than perfect for most applications. The bandwidth usage is automatically optimized to achieve the best speeds possible based on the surrounding environment, and there is no configuration required. The Netsys VDSL2 Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and utilizing external filters (sold separately).
The VDSL2 Ethernet Bridge is typically placed at the remote network device location and can be mounted on a desktop or under the counter. One of the NV-202’s two RJ-45 Ethernet ports connect to a NIC, hub, switch, or other network device. Next, the Line port of the NV-202 is connected to the RJ-11 telephone jack of the 2-wire twisted pair phone line (or network cable) connection extending (up to 10,000 feet/3 km) from the central location. Last, a second NV-202 configured as a CO modem, is installed and all equipment is connected to the AC power source and the link is established automatically on power up. The speed of the link will automatically configure itself based on the distance and quality of the line, with a maximum speed of 100Mbps symmetrical at distances up to 1,000' and a maximum distance of 10,000' at speeds of 5.04Mbps downstream and 1.48Mbps upstream. No configuration is required.
Speed vs. Distance (25K-30Mhz Spectrum - Low Band)
Features
-
- NO CONFIGURATION REQUIRED
- Plug and play, cost-effective Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
- Ideal for remotely located Wireless Access Points
- RJ-11/Terminal Block combo for Line port.
- Supports high bandwidth up to 100Mbps symmetrical
- Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
- Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch
- DIP switch for selecting CO and CPE modes
- Supports long packet size up to 1536 bytes
- Built-In Surge protection
- Wall mountable
- 2 X Auto-sensing 10/100 Mbps Ethernet port with Auto MDIX
- RoHS compliant
- Compact desktop design
- 802.3 Ethernet
- 802.3u Fast Ethernet
- 802.3x Flow Control
Technical Specifications
Product Kit Contents
1 X NV-202 VDSL2 Ethernet Bridge Modem
1 X User Manual Download Link
4 X Plastic Feet
1 X AC to DC Power Adapter
1 X Straight-through Ethernet Cables
1 X RJ-11 Cables
Cable Connections
-
- RJ-45 (Ethernet): Category 3~6 UTP/STP
- RJ-11 (VDSL2): Twisted Pair phone wire
LED Indicators
-
- 1 x Power LED
- 2 x Link/Active Status for Ethernet port
- 1 x Link LED for VDSL2 port
- 1 x CO Mode indicator LED
- 1 x CPE Mode indicator LED
VDSL2 Line Code
-
- Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
-
- Packet Transfer Mode (PTM)
Typical Power Consumption
Power Requirement: Input Voltage
-
- 12VDC / 1A (Commercial-grade Power Adapter)
EMC
-
- EMI Compliant: FCC class A
- EMS Compliant: CE mark
Operating Temperature
-
- 0°C ~ 50°C (32°F ~ 122°F)
- Fanless, free air cooling
Storage Temperature
-
- -20°C ~ 70°C (-4°F ~158°F)
Humidity
-
- 10% to 90% (non-condensing)
Mounting Method
Dimensions
-
- 3.74" X 4.33" X 1.06” (95 mm X 110 mm X 27 mm)
Shipping Weight
Power Requirements
-
- External Switching Power Adapter
(Input: 85-240VAC, 50/60Hz Output: 12V/1A)
Agency Compliance
-
- FCC Part 15 Class A, CE
- RoHS compliant
