Industrial Managed 10-Port L2 Gigabit Ethernet Switches

The KGS-1060 series is an 10-portt industrial managed Gigabit Ethernet switch which is featured with the following switched ports:

– Eight 10/100/1000Mbps Gigabit copper ports

– Two dual-speed SFP slots for 100Base-FX 1000Base-X

– Four 802.3at-compliant PoE+ PSE ports

Key Features:

• Eight 10/100/1000Mbps RJ-45 and two dual-speed SFP slots
• All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
• All copper ports are equipped with IEEE 802.3at-compliant PoE PSE
• Full wire speed forwarding
• Support 802.3x flow control for full-duplex and backpressure for half-duplex
• Port link aggregation function with LACP support
• Support SFP with Digital Diagnostic Monitoring (DDM)
• Alternatively powered via PoE if direct DC power not available
• Optional four 802.3at-compliant PoE PSE ports
• Support PoE PSE Redundancy

Management Features:

• Management:

> HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON

> DHCP/DHCPv6 client, DHCP relay, DNS client. NTPv4

> IPv6 support, System Syslog, Configuration down/upload, Software upload

> HTTPS with TLS 1.2/1.3 support

• Security:

> NAS, 802.1X, MAC-based/Web/CLI authentication, TACACS+, IP source guard

• Layer 2:

> 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation

> Storm control for UC/MC/BC packets, Static MAC configuration

> IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping, Port mirroring

> Multiple Spanning Tree – MSTP, RSTP, STP

> QoS – 8 QoS classes, Tag-based & DSCP-based classification

• KTI’s Auto Multi-Ring (KAMR) Technology:

> Fast failover response time, Auto recovery when failure is repaired

> Supports up to five redundant rings, Works with RSTP network