OpenWrt Indoor AP
APH55C–AC1300 is an indoor Access Point.
System OS
Linux OS base on OpenWRT SDK
Included
Wall Mount & Ceiling Mount
Engineering Requirements Specification (ERS)
1.1 Hardware
Main Chip
Qualcomm IPQ4019
- ARM Cortex A7 717MHz Quad-Core
Wireless Chip
Qualcomm IPQ4019
- 802.11ac/a/b/g/n (dual 2x2 Radio, 11ac support MU-MIMO)
Flash
32Mbytes NOR
RAM
256Mbytes DDR3
eMMC (optional)
4GB~ 64GB
Ethernet
Qualcomm QCA8072
Max. Tx Power (per Chain)
2.4GHz:20dBm (+/-2dBm)
5GHz:18dBm (+/-2dBm)
Antenna
Internal PIFA Anteena
- 2.4GHz (2dBi PIFA Antenna) x 2
- 5GHz (3dBi PIFA Antenna) x 2
USB Port (2.0)
Type A *1 (5V/0.5A)
Console Port
Console Port x 1 (RJ-45)
BLE (Optional)
TI Solution (Module design with pin connector)
- Class 2
- PCB Antenna x 1
- Output Power 4dBm
TPM (Optional)
I²C Interface
Others (Optional)
RTC, Watch Dog Timer + Battery
PoE(PD) Solution
LAN1 supported
(IEEE802.3af compliance)
LED
Green *5
Power Requirement
DC 12V/1.25A or IEEE802.3af
